Help and Guidance

Vinyl Decal Application 

1.      Turn it so the lettering is facing downwards so you can’t see it.

2.      Pull away the thick backing paper carefully and slowly.
3.      Once this has been removed you’ll be left with the decal stuck to a sticky piece of plastic.
4.      Carefully place this exactly where you’d like it to go. Once this is placed it can’t be removed.
5.      Rub down and then carefully peel up the sticky piece of plastic.

 

All done. Please don’t get this wet for the next 72hrs until it has cured.

 Thank you!

Iron on Application 

Ironing boards with light cushioning are recommended to use while doing this (a firm surface is recommended over significant padding for best results).

Iron with a press cloth or piece of cotton fabric (such as a dishtowel) over liner side of the material to protect it from the heat of the iron. The wrapping supplied around the iron on is also fine to use.

 1) Set your iron to the Cotton/Linen setting (generally the highest temperature setting). Make sure the steam setting is OFF for steam irons.2)Use the iron to preheat the area of the material in which you will be applying your cut image for 10-15 seconds.3)Place the image, exactly where you'd like it (it can't be moved once ironed down) shiny side up, onto the preheated material.4) Apply medium pressure with the iron for 25-30 seconds.5)Flip the material over and apply medium pressure with the iron to the back of the material for an additional 25-30 seconds.6)Let cool 1-2 minutes. Remove lining.

 

Please message me if you’re unsure or need any further help 😊 x